9
Assembly Instructions
7
Insert top hinge(E) into bottom hinge(I) and secure them
together with 2pcs Ø5x30 zinc plated pins (HH) and 2pcs
Ø1.4x30 steel cotter pins(II).
Note: If top hinge dose not fit into bottom hinge, gently
squeeze top hinge tabs together.
8
Hardware Used
HH
II
Ø5X30 Pin
Ø1.4x30Cotter Pin
2pcs
2pcs
HH
II
Slide the warming rack (D) into the holes of the lid (C) and
the bottom bowl (H). Make sure to insert the short warming
rack ends into the holes on both sides of the lid (C) and the
long warming rack leg ends into the holes on both sides
of the bottom bowl (H).
Remove the zip tied on the warming rack.
D
