background image

3

WARNING FOR YOUR SAFETY  

 

You must follow all leak-checking procedures before 

operating. To prevent fire or explosion hazard when 

testing for a leak: 

a.  Always perform leak test before lighting the grill and     

each time the tank is connected for use. 

b.  Do not use or permit sources of ignition in the area 

while conducting a leak test. No smoking.   

c.  Conduct the leak test outdoors in a well-ventilated 

area.   

d.  Do not use matches, lighters or a flame to check for 

leaks.   

e. Do not use grill until any and all leaks are corrected.

    If you are unable to stop a leak disconnect the LP 

    gas supply.  Call our customer care at  

    1-866-814-0585, a gas appliance serviceman or 

    your local LP gas supplier.   

Do not use in an explosive atmosphere.  Keep grill   

area clear and free from combustible materials, 

gasoline and other flammable vapors and liquids.    

Keep all combustible items and surfaces at least 36 

inches (91 cm) away from the grill at all times. DO NOT 

use this grill or any gas product under any overhead or 

near any unprotected combustible constructions.  

It is essential to keep the grill’s valve compartment, 

burners and circulating air passages clean.  Inspect 

grill before each use.  

Do not use the grill unless it is COMPLETELY 

assembled and all parts are securely fastened and 

tightened.   

This grill should be thoroughly cleaned and inspected 

on a regular basis.    

Do not alter grill in any manner. Any alteration will void 

your warranty.   

Use only the regulator provided. Any replacement 

regulator shall be specified by the manufacturer.  

Do not use grill in a vehicle trunk, station wagon, 

mini-van, sport utility vehicle (SUV) or recreational 

vehicle (RV).

When cooking fire extinguishing materials shall be 

readily accessible.  In the event of an oil/grease fire, do 

not attempt to extinguish with water. Use type BC dry 

chemical fire extinguisher or smother with dirt, sand or 

baking soda.  

Move gas hoses as far away as possible from hot 

surfaces and dripping hot grease. 

Do not use grill in high winds.  

Never lean over grill when lighting.  

Do not leave a lit grill unattended. Keep children and 

pets away from grill at all times.    

Do not attempt to move grill when in use.  Allow the 

grill to cool (approximately 45 minutes) before moving 

or storing.  

Storage of grill indoors is permissible only if the tank is 

disconnected, removed from the grill and properly 

stored outdoors.   

While wearing a protective glove or mit, open grill lid 

carefully and slowly as heat and steam trapped within 

grill can severely burn you.  

Do not attempt to disconnect the gas regulator from the 

tank or any gas fitting while the grill is in use. 

Disconnect LP gas tank when not in use.  

Always use your grill on a hard, non-combustable, level 

surface.  An asphalt or blacktop surface may not be 

acceptable for this purpose.  

Do not use directly on wooden decks. 

Keep all electrical cords away from a hot grill.  

Do not use grill for indoor cooking or heating. TOXIC 

fumes can accumulate and cause asphyxiation.   

After a period of storage and/or nonuse check for leaks 

and burner obstructions.  

Failure to open lid while igniting the grill’s burner, or not 

waiting 5 minutes to allow the gas to clear if the grill 

does not light, may result in an explosive flame-up. 

Never operate grill without heat plate installed.  Always 

use a meat thermometer to ensure food is cooked to a 

safe temperature. 

Use protective gloves when assembling this product.  

Do not force parts together as this can result in 

personal injury or damage to the product.   

Never cover entire cooking area with aluminum foil.  

Death, serious injury or damage to property may occur 

if the above is not followed exactly. 

Use only Blue Rhino Global Sourcing, Inc. factory 

authorized parts. The use of any part that is not factory 

authorized can be dangerous. This will also void your 

warranty.   

Do not attempt to repair or alter the hose/regulator for 

any “assumed” defect. Any modification to this 

assembly will void your warranty and create the risk of 

a gas leak and fire. Use only authorized replacement 

parts supplied by manufacturer.  

Do not use this appliance without reading “Operating 

Instructions” in this manual.    

Do not touch metal parts of grill until it has completely 

cooled (about 45 min.) to avoid burns, unless you are 

wearing protective gear (pot holders, gloves, BBQ 

mittens, etc.). 

Do not install or use in or on boats or recreational 

vehicles.  

Содержание SRGG806















Отзывы: