•
Control of parallel updated modules (LGB
®
)
•
Easy function mapping with direction assignment
•
Programmable flashing light function and short term function
•
Dimmable light and function outputs, activatable in analog
•
Output for a RC-Servo
•
Many settings may be used analog too
•
Reset function for all CV-values
•
Bus interface for MASSOTH modules
2.2. C-clamps
Please note the pin assignment in the illustration below:
2.3. Hook-Up to a LGB
®
gear box
(Illustration 3)
All current
LGB
®
gear boxes feature 4 contact pins on the upper side. To utilize these gear boxes for digital
operation the pins must be connected to the eMOTION XLS Sound Decoder according to the schematic below.
Older versions of LGB
®
gear boxes have only 3 contact pins. These gear boxes need to be changed for digital
operation. One pin is connected to the motor and the track. This connection needs to be disconnected as
the
motor and the track must be isolated for digital operation.
eMOTION XXL Decoder 4
Illustration 1: eMOTION Decoder C-clamps assignment
Illustration 2: Connection of the eMOTION XXL