2.4. General Hook-Up
The decoder features three light outputs on the decoder. These are front light, rear light and interior light. Front
and rear light are activated according to the driving direction. The interior light are activated in both directions.
Please observe the maximum current for each output: 500mAmps/output. Light bulbs and other consumer
loads (e.g. smoke generator) are connected to Dec+ and the respective output (LF, LR or A1, see illustration 4).
Light bulbs and smoke generators used must be suited for 24 Volts. In case 5Volt bulbs and smoke generators
are used, please see in “Advanced Functions“ (Chapter 3.2) for the correct output setting.
2.5. Basic Factory Settings
•
CV1 = 3 (loco address)
•
Light outputs adjusted to full track voltage
(for 19/24 Volt bulbs)
•
Switching Speed on/off by F8
(half speed)
•
Functions Outputs A1 to A6 mapped to Function Keys F1 to F6
•
CV29 = 4 (to comply with 14 speed steps for MTS)
For 28 speed steps, CV29 must be set to “6“.
•
CV49=2
(only parallel functions. For serial set CV49 to 3)
eMOTION XXL Decoder 5
Abbildung 3: Connection eMOTION XLS Sound Decoder to a LGB Gear Box
Illustration 4: Connection of bulbs