16
5.2 Analogbetrieb
Der Analogbetrieb ist bei Auslie-
ferung gestattet. (Analogbetrieb
sperren mit CV 29 Bit 2, wichtig bei
Anschluss eines Spannungspuffers).
Viele Einstellungen (Blinken, Dim-
men, etc.) sind auch analog nutzbar.
5.3 Resetfunktion
Über CV 8 kann der Decoder in den
Auslieferungszustand zurückgesetzt
werden. Verwenden Sie dafür die
Programmierart CV schreiben mit
den folgenden Werten
• 11 (für die Grundfunktionen)
• 16 (Programmiersperre CV 15/16)
• 22 (Licht und Funktionen 1...4)
• 33 (Licht und Funktionen 5...8)
• 44 (Servoeinstellungen)
5.4 Programmierung mittels PC
und Softwareupdate
Dieser Decoder kann über das
DiMAX PC Programmiermodul
upgedatet werden.
WICHTIG! Firmwareupdates nur als
einzeln angeschlossenes Modul
durchführen!
5.2 Analog operation
The analog operation is admitted as
a factory default setting. (deactivate
analog operation with CV 29 Bit 2
if a power buffer is used). Many
functions (flash, dimming, etc.) can
be used in analog mode as well.
5.3 Reset function
The decoder can be reset to its fac-
tory default settings with CV 8. Use
the function „CV programming“ to
reset the decoder with the following
values
• 11 (basic settings)
• 16 (Programming Lock CV 15/16)
• 22 (light and functions 1...4)
• 33 (light and functions 5...8)
• 44 (servo functions)
5.4 Programming via PC
and Softwareupdate
This decoder can be programmed
using the DiMAX PC Module.
IMPORTANT! To run a software
update only connect one module
at a time.
Содержание eMOTION 8FS
Страница 1: ...eMOTION 8FS Servodecoder eMOTION 8FS Servo Decoder 8152501 ...
Страница 17: ...17 ...