6
2.3 Ausgänge A1-A4
Diese Ausgänge können als norma-
ler Funktionsausgang (5V) und GND
oder zum direkten Anschluss eines
Servos genutzt werden. Die Bele-
gung der Stecker sind in Abbildung
1 zu sehen. Alle Ausgänge können
im Endstellungsmodus (also Start-
und Endstellung) betrieben werden.
Zusätzlich können die Ausgänge
A3 - A4 über den Drehregler im
Fahrstufenmodus individuell in
ihrer Position gesteuert werden.
2.3 Function Outputs A1-A4
These outputs can be used diffe-
rently, as a standard function output
(5V re GND) or direct connection
of a servo. The pin assignment
are shwon in figure 1. All outputs
can be operated in end positioning
mode (with start and end position).
Besides that outputs A3 and A4
can be used in speed step mode
to individually control the position
with the controller (wheel knob).
Both end positions are set in the end
Gleis/ Track
+5V DEC-
A4
A3
A2
A1
DEC-
A7
DEC+
(max. +22V
-no/kein Servo +!)
A8
DEC+
A5
A6
Abbildung 1: Anschlüsse auf der Oberseite
Illustration 1: Connections on Top-side
Содержание eMOTION 8FS
Страница 1: ...eMOTION 8FS Servodecoder eMOTION 8FS Servo Decoder 8152501 ...
Страница 17: ...17 ...