Model: DDU-24/26
Doc. Ref. no. : - m06bom101
Issue no. 09
User’s Manual
Page 39 of 51
6.2.5
Configuration command through Master (GPS-MC-2) Over Wireless:
DDU-24/26
offers facility to the users for configuring communication parameters of serial port,
Display Format Selection, Time Zone Selection, Manual Time Set, Set Default Parameter,
Retransmission selection set by Key or configuration Frame Sent by master GPS-MC-2 over
Wireless and View Current Settings by Key Configuration.
Error Message code Can be Display when any Error Found in received Configuration frame from
Master (GPS-MC-2) over Wireless. Show the Table 4 for Error message display code
User can see the Slave ID of Unit in Run Mode by sending reset command through Master(GPS-
MC-2)
If Slave ID does not match with Received Frame then lower digit of second and Lower digit of month
or Year DP Blinking Started for 2 second.
Table 4 Error Message Display Code
Er.01
Display Mode
Er.02
Time Mode
Er.03
Date Mode
Er.04
Time Zone Offset set Mode
Er.05
Baud Set mode
Er.06
Stop set Mode
Er.07
Parity set Mode
Er.08
Retransmission Mode
Er.09
RF Frame Transmit Channel set Mode
Er.10
RF Frame Receive set Mode
Er.11
Unlock Blinking set Mode
Er.12
Slave ID
Er.13
Show Slave ID Error Command
Note:
1) Er.03 code Display in DDU-24 when you will try to set Date Mode YY.MM.DD Format
.
