Model: DDU-24/26
Doc. Ref. no. : - m06bom101
Issue no. 09
User’s Manual
Page 29 of 51
6.2.4
Configuration command through Telnet
6.2.4.1 For the First Time setup follow the below procedure.
1.
Masibus DDU-24/26 Display Unit has default network settings as mentioned in
Section 6.1
,
First connect the Display Unit direct with local computer using a
cross
cable. (Not in Network)
2.
Make the computer IP 192.168.100.XXX (XXX is any value between 1 to 255)
3.
Ping the Display Unit IP & response must come from it. Now follow the below commands to
configure the Display Unit.
To check ping command open run window & enter
ping xxx.xxx.xxx.xxx
–t
command where
xxx.xxx.xxx.xxx means the IP of DDU-24/26.
6.2.4.2 Network settings using windows as TELNET client.
1. Open command prompt.
2. Enter Telnet and press Enter.
3.
Enter “
open 192.168.100.32”
and press Enter.
4. Following screen will be displayed.
