Model: DDU-24/26
Doc. Ref. no. : - m06bom101
Issue no. 09
Page 36 of 51
User’s Manual
2. MT
This command is used to Set
Manual Time Setting
for DDU-24/26.
By entering “
MT
” You will enter in
Manual Time Setting
Configuration.
Enter Time and Date in HH:MM,DD/MM/YY mode for DDU-24 and HH:MM:SS,DD/MM/YY for DDU-26
after it will give conformation.
3. P
The user is allowed to change telnet password. The command for changing the password is: P
(
password
).
Then enter new password and press enter. To save the new password press
„Y‟
else press
„N‟.
If
you press
Y
new password will be saved and if you press
N
the previous password will be
retained.
The default password is „masibus‟.
Remember that the password should not exceed 10 characters. If you try to keep a password that
has more than 10 characters, the system will show an error “Invalid Entry” and the previous
password will be retained.
