Maserati GranTurismo Sport 2015, Руководство пользователя

Страница: 99 / 242

4
99
1) Read the 5-digit electronic code on
the CODE CARD.
2) Turn the ignition key to MAR
(ON) : the CODE and OBDII
warning lights are on.
3) Press the accelerator pedal
fully down and keep it pressed.
Approximately 8 seconds later, the
OBDII warning light
will go
off. Release the accelerator and
get ready to count the number of
times the OBDII warning light
flashes.
4) As soon as the displayed number
of flashes is equal to the first digit
of your CODE CARD, depress the
accelerator and keep it pressed
down until the OBDII warning light
goes off, after being off for
approximately 4 seconds. You can
now release the accelerator pedal.
5) The OBDII warning light
starts flashing again. As soon as
the displayed number of flashes
is equal to the second digit of
your CODE CARD, press down the
accelerator pedal and hold it.
6) Proceed in the same manner for the
remaining digits in the code on the
CODE CARD.
7) When the last digit has been
entered, keep the accelerator pedal
pressed down. The OBDII warning
light
illuminates for 4 seconds
and then goes off. You can now
release the accelerator pedal.
8) A quick flashing of the OBDII
warning light
(about 4 seconds)
confirms that the operation has
been performed correctly.
9) Start the engine turning the key
from MAR (ON) to AVV (START) .
If the OBDII warning light
remains on, turn the key to STOP
(OFF) and repeat the procedure
from step 1.
This procedure can be repeated an
unlimited number of times.
WARNING: After an emergency
start-up, you should contact your
local
Authorized Maserati Dealer ,
otherwise you will have to perform
the emergency start procedure every
time the engine is started.