Maserati GranTurismo Sport 2015, Руководство пользователя

Страница: 150 / 242

A B
C
5
150
Cruise Control
General
The Cruise Control function allows the
driver to maintain the desired vehicle
speed constant without pressing
the accelerator pedal. This helps
reduce driving fatigue on highways,
especially long trips, as the set speed
is automatically maintained.
WARNING: The device can only
be activated at speeds exceeding
19 mph (30 km/h) and it turns off
automatically when the brake pedal
is depressed or when a speed of 125
mph (200 km/h) is exceeded.
Cruise Control must only be
activated when traffic and
the route permit a constant
speed to be maintained safely for a
sufficiently long distance.
Controls
Cruise Control is controlled by switch
A , by the rotating section B and by
button C (RCL).
Switch A has two positions:
- OFF the device is deactivated;
- ON the device is active. When
the device is activated, the green
warning light
on the display
illuminates together with the
message “Cruise Control on”.
The rotating section B is used to
store the vehicle speed and to keep
it constant, or to increase or decrease
the speed stored.
Turn the rotating section B to position
(+) to save the speed reached or to
increase the speed stored.
Turn the rotating section
B to position
(–) to decrease the speed stored.
Every time the rotating section
B
is reset, the speed is increased or
decrease by approx. 0.6 mph (1 km/h).
Keep the rotating section turned
to vary the speed continuously.
When a new speed is reached, it will
automatically remain constant.
Button
C ( RCL ) is used to resume the
speed stored.
WARNING: When the ignition key is
turned to
STOP (OFF) or switch A is in
the OFF position, the speed stored is
erased and the system deactivated.