Maserati GranTurismo Sport 2015, Руководство пользователя

Страница: 87 / 242

3
87
Reprogramming a single key
If you want to program activation
of a new system on an already used
HomeLink key, proceed as follows:
- press and hold down the HomeLink
key selected;
- after about 20 seconds, the LED T
starts flashing; keep the key pressed
down;
- hold the original remote control of
the device to be controlled close to
the HomeLink control panel (12 in);
- press and hold down the original
remote control key;
- successful programming is signaled
by the LED T flashing faster;
- release both keys.
The system previously programmed
on HomeLink has thus been replaced
with the new programming and is
ready to be used.
This operation has no impact on the
other HomeLink keys.
Deleting the programmed keys
Unlike programming which is done
for each individual key, deletion is
done for all three keys simultaneously.
To delete, proceed as follows:
- press and hold down the keys
Q
and S ;
- after about 20 seconds, the LED T
starts flashing;
- release the keys.
WARNING: It is advisable to carry out
the HomeLink deletion procedure
when you intend to sell the vehicle.
As required by the FCC:
This device complies with Part 15 of
the FCC rules. Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’s authority to operate the
equipment.
This device complies with Industry
Canada Standard RSS-210.
Operation is subject to the following
two conditions: (1) this device may
not cause interference, and (2) this
device must accept any interference
that may cause undesired operation
of the device.
California Proposition 65
Warning
THIS MOTOR VEHICLE CONTAINS
CHEMICALS KNOWN TO THE
STATE OF CALIFORNIA TO CAUSE
CANCER, BIRTH DEFECTS OR OTHER
REPRODUCTIVE HARM
(see page 7)