Maserati GranTurismo Sport 2015, Руководство пользователя

Страница: 106 / 242

E
D
C
4
106
Seatback tilt
To tilt the front seatback, lift lever C
and move the backrest forward.
To facilitate access to the rear seats
or exiting the vehicle, the front seats
are fitted with the “Easy Entry”
device (only active when the door is
open), which moves the seats forward
automatically when the seatback is
reclined forwards, and returns them
to their original position when the
seatback is tilted back again.
WARNING: The system (excluding
the seat with position memory)
incorporates a safety device which
stops the seat travel and then moves
it forward slightly when the seatback
comes in contact with any passengers
seated in the rear seats.
To stop the seat when it is
automatically moving forward or
backward, operate any control.
The seat cannot be occupied
when reclining the seatback
or moving it to the upright
position.
Passengers shall get in or out of the
rear seats only when the front seat
is stopped. Take the greatest care to
avoid that passengers on the rear
seats (especially children) touch the
seat and its guides when it is moving.
Heating system
Heating is activated by turning
control
D . Two heating pads are used
to heat the seat. When this function
is active for one or more seats, the
relative warning light illuminates on
the display.
Using control
D , heating can be
adjusted to 3 different levels.
When the heating system is activated,
the relative function will appear on
the instrument panel display.
WARNING: Turn off the heating
system when not required, to prevent
unnecessary power usage.
Storing the positions of the seats
and external rear-view mirrors
The system allows you to store and
recall 3 different positions for the
driver’s seat and the external rear-
view mirrors (buttons
E ).
The storage procedure is only possible
with the ignition key in position
MAR (ON) . Adjust the position of
the seat, the external rear-view
mirrors and the steering wheel, then
engage reverse gear and position
the external passenger’s mirror again
to help ensure the best possible
visibility for reversing, then disengage
reverse gear. Next press one of the
three buttons “1”, “2” or “3”, each
corresponding to a memorizable
position, for more than 3 seconds
until you hear a confirmation tone.
Lumbar support adjustment is not