Maserati Ghibli 2021, Руководство пользователя

Страница: 354 / 382

8
352
Maintenance and Care
CAUTION!
•
Before disconnecting the battery,
open the liftgate and lower the
windows a few centimetres, to avoid
damaging the seal and the glass
when opening and closing the door.
When the battery is connected, the
lowering of the window is performed
automatically when the door is
opened and closed. The liftgate
must remain open and the windows
lowered until the charged battery is
reconnected.
•
Never disconnect the battery from
the electrical system when the engine
is running.
• To temporarily disconnect the vehicle
electrical system from the battery,
simply remove the cable end with
quick coupling from the negative
post (
–
) of the battery.
• If the battery needs to be removed
from its compartment, you must first
detach the terminal clamp to the
negative post (
–
) and then the other
terminal clamp to the positive post
(
+ ), after removing the protective
cover. Battery posts are marked
positive (
+ ) and negative (
–
) and are
identified on the battery case.
To Reconnect the Battery
CAUTION!
• It is essential when reconnecting
the cables on the battery that the
positive cable is precisely attached to
the positive post (
+ ) and the negative
cable is attached to the negative post
(
–
).
•
Cable clamps should be tight on the
terminal posts and free of corrosion.
After the battery has been
disconnected and re-connected
and before starting the engine it is
necessary to proceed as follows:
• Unlock and lock the doors using the
key fob.
• Close manually the liftgate, unlock
it with the key fob and then lock it
manually on more time. If the vehicle
is equipped with power liftgate,
manually perform the complete
closure. Then move the liftgate
automatically, using the buttons
on the outer edge of the left boot
compartment, performing a complete
cycle of opening and closing. If the
limit of maximum power liftgate
opening has been set, it is necessary
to reset it (see “Open and Close
the Liftgate” in section “Before
Starting”).
• Initialise the climate control system
by activating the system and pressing
the “AUTO” control as described in
chapter "Air Conditioning Controls"
in section “Dashboard Instruments
and Controls”.
• Turn on the MIA and set the date
and time (see “TFT Display Setting
and Menu Overview” in section