Maserati Ghibli 2021, Руководство пользователя

Страница: 131 / 382

4
129
Dashboard Instruments and Controls
default view (associated with current
gear state).
See “Surround View Camera System”
in section “Driver Assistance Systems”
for further details.
• Mirror Dimmer
The auto-dimming function can be
disabled or re-enabled by touching
this soft-key. See "Rear-View Mirrors"
in section "Understanding the
Vehicle" for further details.
• Glove Box
This function allows you to enter a 4-
digit PIN code to lock and unlock the
glove box in the passenger side of
the dashboard.
See "Glove Box Compartment" in this
section for further details.
• Start&Stop Off
This function allows you to disable
the Start&Stop when frequent stops
and restarts of the engine may
become annoying.
See "Automatic Start&Stop System"
in section "Starting and Driving" for
further details.
Functions of Settings
Menu on MIA
The MIA system uses a combination
of keys able to access and change the
customer programmable functions
present in the "Controls" or "Settings"
menu of the "Vehicle" screen page.
A shortcut to set the customer
programmable functions is available in
the "Apps" screen page.
Once you enter the “Settings” screen,
using the touch soft-keys or turn
the "TUNE-SCROLL" knob to scroll
and change settings of the customer
programmable functions.
NOTE:
• All settings must be edited with
ignition device set to RUN position.
• Some of the customer programmable
functions are optional or for a
specific model/version and may not
be available on your vehicle.
• Only one touch screen area/soft-key
may be selected at a time.
Modes for Setting a Function
To enter the desired function, touch
the corresponding soft-key on the
lateral list (the picture shown is
“Display”).
To scroll through the functions of
the list, move the cursor up or down,
or touch the arrow
or until
the function to be set is displayed.
Touching the
or soft keys and
the cursor on the right side of the
screen will allow you to scroll up or
down through the available setting
options. In this screen one or more
boxes may indicate status or possible
variants of the function. A check mark
in a box indicates the active status of
the function.
When in a setting line with many
options:
• touching on the option currently not
selected (no check mark in option)
move the selector and change the
option accordingly;
• touching on the option already
selected (with selection) do not