Mascom MC513000, Руководство по эксплуатации, Страница: 16 / 27

GC-APPI Interface Page 16
Operation of the GC-APPI Interface
Setting up the Instrument Configuration for
Thermo GC Systems
Close all Xcalibur programs and open the
Instrument Configuration. Make sure the GC
devices are installed and select the Thermo
Focus ,
Trace 2000 , Trace Ultra or Trace 1310 GC from
the list of GC devices.
Figure 22: Xcalibur Instrument Configuration
If you are using an autosampler, please select it
from the list too. Check that the communication
of the GC (and autosampler) is correct and close
the Instrument Configuration panel.
Setting up the Instrument Configuration for
APPI Source usage
In the Instrument Configuration select the
Orbitrap Fusion and click on configure (see Figure
23).