Maschio ENTRY 120, Использование и обслуживание

Страница: 37 / 88

USE AND MAINTENANCE
ENGLISH
Cod. F07022163 pag.35
7.4_CONNECTION OF VARIOUS DEVICES OF THE ROUND BALER
After completing the hooking up of the round baler to the towing device of the tractor “7.2_Hook up to the
tractor for towing” , retract the parking jack to the rest position.
Then continue with the connection of the various devices of the round baler:

Connection of the control system “FF_Control”

Connection of the lighting system

Connection of the hydraulic system.

Attachment of the cardan shaft.
7.4.1_CONNECTION OF THE CONTROL SYSTEM “FF_Control”
When you connect the machine to the tractor for the first time you must first connect the power cable "A" to
the battery "b" 12V= of the tractor.
IMPORTANT! Be careful not to invert the polarity:

RED cable "+" pole (positive)

BLACK cable "-" pole (negative)

This must be done with the tractor off.
The electrical circuit of the round baler requires a supply current with negative earth 12V=
The plug
"S1" of the battery feed cable must be positioned behind the tractor.
Install the terminal in the tractor cabin so that it is clearly visible and within the reach of the operator.

Position the terminal “FF” correctly in the tractor cabin.

Connect the current cable “C” .

Connect the signal cable “CS” .
Check that the terminal has come on by pressing the appropriate key; if the cables have been connected
correctly, the system will come on.
7.4.2_CONNECTION OF THE LIGHTING SYSTEM
Connect the lighting system and check that all the indicator, parking and stop lights are working correctly.
Do not modify the cables and do not replace plugs and sockets that are not in conformity with the originals.
For any maintenance and/or repair work contact our Assistance Centre.
MASCHIO FIENAGIONE declines all liability resulting from failure to observe these warnings.
b
A
CS
FF
S1
C
FUSE