Maschio ENTRY 120, Использование и обслуживание

Страница: 32 / 88

ENGLISH
USE AND MAINTENANCE
pag.30 Cod. F07022163
6.2_DESCRIPTION OF THE WORK PROCESS
The round baler carries out the following operations:
1) Gathering of forage already cut in swathes
2) Pressing into a cylindrical shape (bale) and bale tying (twine binding or net wrapping)
3) Ejection of the bale onto the ground
The round baler picks up forage prepared in swathes of maximum width 1.20m with the narrow pick-up
or a maximum width of 1.70m with the wide pick-up.
The pick-up unit can be raised hydraulically and is adaptable to the ground. With side aprons, and in the
case of the wide pick-up also with two 2 side screw feeders, the forage is gathered to a width of 1.20m
corresponding to the width of the bale.
A front conveying rake and shaped rollers guide the forage into the compression chamber. Here the
forage is formed into cylindrical bales by bars that rotate continually.
1 2 3
When the bale has been completed the red light on
the terminal of the control system comes on together
with an acoustic signal, because the black pointer of
the pressure gauge reaches the red mark
“R” (value
pre-set using the adjustment knob “P” ) and the tying
has to be started manually.
pressure max. = 190bar
The bale is ejected hydraulically without the need to get off the tractor.
IMPORTANT!
It is important to disengage the PTO before ejecting the bale!
R
P