Z1
Q
R
2
0
HYDRAULIC CARTRIDGE
FIG. 19
Fit the rebound spring (12) into the hy-
draulic cartridge. Insert the complete hy-
draulic cartridge (11) or (29) with the
stanchion pressed fully down into the
slider.
IMPORTANT:
The cartridge with
the BLACK adjuster goes into the
l.h. fork leg.
11-29
12
18
17
Nm
12
50
FIG. 20
Grease the O-ring (17) on the foot nut (18)
and screw the nut on the hydraulic car-
tridge threaded end.
Tighten to 12 Nm.
Pump stanchion up and down several
times to make sure it slides properly through
the stroke.
HOW TO FILL WITH OIL
FIG. 21
Pour the oil little by little when the stan-
chion tube is fully down and then pump
with the cartridge (11) or (29) rod so as to
have a better filling. Cartridge is full when
no air is detected when pumping, in the
fully compressed position.
Check that the oil level is 50 mm/1.97 in.
from the top of the stanchion tube in each
leg.
