Z1
Q
R
2
0
FIG. 4
Push the stanchion tube into the slider and
remove the spring (9).
Let all the oil drain into the fork leg. By
following this procedure, there is no need
to check the oil level. Make all necessary
changes.
9
18
17
11-29
12
HYDRAULIC CARTRIDGE CHANGE
FIG. 5
Let all the oil drain out.
WARNING:
Remember to always
recycle any used oil.
To change the fork leg oil follow the
procedure as described in section
“REASSEMBLY” from FIG. 21 to FIG. 26.
Turn the fork leg upside-down and un-
screw the foot nut (18) complete with O-
ring (17) by the use of a 15 mm socket
wrench.
FIG. 6
Pull the hydraulic cartridge (11) or (29)
complete with rebound spring (12) out of
the stanchion tube.
Replace the whole hydraulic cartridge.
IMPORTANT:
The hydraulic car-
tridge accommodated in the l.h.
fork leg controls COMPRESSION damp-
ing. You can tell it from the rebound
cartridge by the BLACK end and the holes
in cartridge casing.
