X-Fly
Nm
11
20
19
H
Travel
Leg
H
(mm)
(mm)
80
100
Lh.
Rh.
Lh.
Rh.
40
40
25
25
Dx.
Sx.
12
9
11
6-9
FIG. 21
Lubricate O-Rings
(19)
on the foot nuts
(20)
and screw them onto the cartridges
(12)
and
(11)
threaded end.
Tighten to 11 Nm.
Check to verify that the stanchions slide
properly through the stroke by pumping
them up and down several times.
HOW TO FILL WITH OIL
FIG. 22
Pour oil little by little when the stanchions
are fully down and then pump with the
crown so as to have a better filling.
Check that the oil level
(H)
is as required in
both legs.
HYDRAULIC CARTRIDGE
RE-ASSEMBLY
FIG. 20
Push the stanchions up to slider bottom.
If removed, insert the bottom washers (
23
,
see exploded view) in the stanchion.
Slide in the cartridges fitted to forks with
travel of 100
, the rebound spring
(9)
.
Slide in the LH cartridge fitted to forks with
travel of 80
,
the rebound spring
(9)
and
the rebound spring
(6)
in the RH cartridge;
Push the hydraulic cartridges
(11)
and
(12),
complete with seals and retaining
parts, fully inside the stanchions.
