X-Fly
13
1
13
13
14
FIG. 18
Lubricate the dust seals
(13)
and fit them
into the stanchions from the spring end.
CROWN AND STANCHIONS
ASSEMBLY
FIG. 19
Fit the crown and stanchions assembly
(1)
- with the dust seals in place - gently into the
sliders seals.
WARNING:
to avoid any damages
to sealing surfaces, keep the stan-
chions duly lubricated and squared into the
sliders.
Check to see that the stanchions slide unre-
stricted by cycling the fork up and down
several times.
The tube should slide freely inside the seal
assembly without any side play. In the event
it is too hard or too soft, repeat the previous
steps described above and check compo-
nents to ensure they are not damaged.
Seat the dust seals
(13)
on top of the
sliders.
FIG. 17
Insert the stop ring
(14)
into the slider
making sure it is properly seated into place.
Use buffer
(B)
to properly seat the ring into
the slider.
