X-Fly
1 18
20
19
12
11
9
6-9
Sx.
Dx.
FIG. 4
Push the stanchions
(1)
into the sliders
(18)
and let all the oil drain out from the fork legs.
Pump the stanchions several times to help
oil drain off.
WARNING:
Remember to always recycle
any used oil.
To change the fork leg oil follow the proce-
dure as described in section “REASSEMBLY”
from Fig. 22 to Fig. 24.
HYDRAULIC CARTRIDGE CHANGE
FIG. 5
Turn the fork leg upside-down and unscrew
the foot nuts
(20)
by the use of a 15 mm
socket wrench complete with O-Rings
(19)
.
FIG. 6
Pull the hydraulic cartridge
(12)
and
(11)
complete with rebound spring.
IMPORTANT:
cartridges fitted to forks
with a
travel of 100
feature a rebound
spring
(9)
that is the same fitted in both fork
legs.
Rebound springs in forks with a
travel of
80
are different: rebound spring
(9)
is in
the LH fork leg, while rebound spring
(6)
is
in the RH fork leg.
Remove the bottom washers (
23
, see ex-
ploded view) from inside the stanchions.
NOTE:
the hydraulic cartridge is supplied
with gaskets and lock nut
(26)
.
These parts can be also ordered separately
(see exploded view).
Replace the whole hydraulic cartridges.
