Shiver
SC
15
14
13
12
3-30
16
40
3-30
14
13
12
27
REASSEMBLY
CAUTION:
before reassembling, clean all
metal parts carefully with inflammable and
biodegradable solvent and dry them with
compressed air.
PILOT BUSHING AND SEAL
ASSEMBLY
FIG. 13
Protect the stanchion
(3)
and
(30)
end with
adhesive tape in order not to damage the
seals.
Follow this sequence to fit the components
on the stanchion: dust seal
(16)
first, then
stop ring
(15)
, seal ring
(14)
, cap
(13)
and guide bushing
(12)
.
FIG. 14
Remove adhesive tape and clean-off any
glue.
Insert the screwdriver tip into the guide
bushing slot
(40)
to fit it on the stanchion:
drive it on its location by hand.
FIG. 15
Install the stanchion
(3)
and
(30)
with
bushing into the outer slider
(27)
with max.
care. Drive guide bushing
(12)
, cap
(13)
and seal ring
(14)
manually until they
contact the outer slider.
