background image

— 11 —

CAUTION!

Shutting Engine Off

Before shutting the engine off, allow it to idle for a short
while.

• Never stop the engine by closing the choke.
• Never stop the engine during operation while running

above idle speed.

Transporting and Storage

• Shut off the engine and allow it to cool before transporting or storing the unit.
• Do not put the unit on dry grass or near any flammable object unless the engine is cold or cooled

down.

The lowest position of lever is "STOP setting, and the highest position is the "FULL THROTTLE"

setting.

Be sure the mister is correctly assembled and all fasteners and fittings are properly secured.

THROTTLE LEVER

Before operating the mister, release the knob, adjust the throttle grip to
theposition in the illustration, and tighten knob to secure in place.

When the mister is strapped to the back of the operator, the throttle lever of is
located on the tube.

THROTTLE
LEVER

HIGH SPEED
IDLE SPEED

STOP

HIGH

KNOB

IDLE

Chemicals

*Read the labels of chemicals to be used carefully and understand the method of use and cautions.

Use the chemicals directly after opening the package. Chemicals left for a long time after the
package is open may cause poor discharging due to moisture absorption.

*Mistaking the ratio of chemicals mixture can cause damaging effects to health of plants and health

of operator and/or other people.

*Do not leave the chemicals in the chemical tank for a long time. The machine might malfunction.
*Store chemicals in a safe place, and be careful not to break open their containers during

transportation.

*Treat chemical containers to ensure safety.
*Dispose the used chemical or fertilizer bags in a manner that will not cause injury.
*Pay attention to the handling of chemicals and fertilizer. If a chemical enters into eye or mouth,

wash it off with water immediately. If you feel ill, see a doctor immediately.

*According to wind direction, change the discharging method to protect workers and houses. When

discharging chemicals, work from upwind to downwind. Also give consideration to prevent
chemicals from drifting or scattering on crops, enclosures, fish-breeding ponds, and houses
nearby.

*When preparing chemicals, prepare the necessary amount only in accordance with the

established spraying plan. In order to minimize leftover chemical reagent, make certain to
calculate desired quantity of each chemical before mixing.

Содержание Mister MM300





















Отзывы: