background image

— 2 —

Maruyama shall not be liable for any incidental or consequential damages for breach of any express or
implied warranty on these products except to the extent prohibited by applicable law.  Any implied
warranty of merchantability or fitness for a particular purpose on these products is limited in duration to
the warranty period as defined in the limited warranty statement.  Maruyama reserves the rights to
change or improve the design of the product without notice and does not assume obligation to update
previously manufactured products.
This warranty provides you with specific legal rights, which may vary from state to state.
It is the Owner's and Dealer's responsibility to make sure the Warranty Registration Card is properly filled
out and mailed to Maruyama U.S., Inc.  Proof of purchase and registration will be required in order to
obtain warranty service.

To locate an Authorized Maruyama Servicing Dealer nearest you, contact:

Maruyama U.S., Inc.

4770 Mercantile Drive, suite100,

Fort Worth, TX 76137 U.S.A.

940-383-7400

[email protected]

www.maruyama-us.com

The engine exhaust from this product 

contains chemicals known to the State 

of California to cause cancer, birth 

defects or other reproductive harm.

WARNING:

FEDERAL EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The U.S. Environmental Protection Agency (EPA) and Maruyama Manufacturing Company, Inc. are
pleased to explain the emission control system warranty on your small off-road engine. New 1997 and
later model year small off-road engines must be designed, built and equipped, at the time of sale, to meet
the U.S. EPA regulations for small off-road engines. The equipment engine must be free from defects in
materials and workmanship which cause it to fail to conform with U.S. EPA standards for the first two
years of engine use from the date of sale to the ultimate purchaser. Maruyama Manufacturing Company,
Inc. must warrant the emission control system on your small off-road engine for the period of time listed
above provided there has been no abuse, neglect or improper maintenance of your small off-road engine. 

Emission durability of 300 hours.

Your emission control system may include parts such as the carburetor or fuel injection system, the
ignition system, and catalytic converter. Also included may be hoses, belts, and connectors and other
emission related assemblies.

Where a warrantable condition exists, Maruyama Manufacturing Company, Inc. will repair your small off-
road engine at no cost to you, including diagnosis (if the diagnostic work is performed at an authorized
dealer), parts, and labor.

MANUFACTURER'S WARRANTY COVERAGE:

The 1997 and later model year small off-road engines are warranted for two years. If any emission-related
part on your engine is defective, the part will be repaired or replaced by Maruyama Manufacturing
Company, Inc. free of charge.

MM300

Содержание Mister MM300





















Отзывы: