A
WARNING
POTENTIAL HAZARD
• Without the strap installed, the
Brushcutter blade can produce side
thrust which cau expose the operator
and bystanders to blade contact.
• If the Brushcutter is not correctly posi
tioned on the operator's right side, the
blade can produce side thrust which
can expose the operator and bystanders
to blade contact.
'WIIA.T CAN HAPPEN
• Contact with the Brushcutter blade can
cause severe personal injury.
HOW TO AVOID TIIE
HAZARD
• Never operate the Brushcutter without
installing and using the strap.
• Always operate the Brushcutter with the
unit on your right side.
2.
The operator must be wearing the strap attached to
the Brushcutter, and the Brushcutter must be on
the operator's right side.
3.
The operator's right hand should be holding the
right-hand bullhorn grip, with his or her fingers on
the throttle trigger.
4.
The left hand should be holding the left-hand bull
horn grip with the fingers and thumb fully
enclosed around the grip.
5.
Always release the throttle trigger and allow the
engine to return to idle speed when uot cutting.
6.
Stop the Brushcutter engine when moving
between work sites.
A
CAUTION
• Always wear gloves and protective cloth
ing when operating the Brushcui:ter.
-20-
• If the Brushcutter blade becomes jammed, stop
the engine immediately.
• Make certain all moving parts have stopped and
disconnect the spark plug before inspecting the
equipment for damage.
• Never use a Brushcutter that has chipped; cracked
or broken cutting attachment or shield.
IMPORTANT: To detach the strap quickly
from the Brushcutter, pull upward on the red
band.
Red Band
Strap
