2.
Position the slotted fitting on the carburetor so the
recessed hole for the cable lug is away from the
cable adjuster sleeve.
3.
Rotate the carburetor throttle cam clockwise and
slip the throttle cable through the slot in the slot
ted fitting, making sure the cable lug drops into
the recessed hole.
4.
Operate the throttle trigger a few times to make
sure that it works correctly.
5.
Adjust the cable adjuster sleeve so the stop on the
carburetor throttle cam just contacts the throttle
stop when the throttle trigger is fully depressed.
6.
When the throttle cable is adjusted correctly, tight
en the locknut.
[Models: BC2300, BC2600, BC3200]
Installing Trimmer Head Shield
A
CAUTION
POTENTIAL HAZARD
• The cutoff blade is sh
arp
,
WIJAT CAN HAPPEN.
• Contact with cutoff blade could cause
serious cuts or personal injury.
HOW TO AVOID THE HAZARD
• Keep hands, feet and clothing away from
cutoff blade.
l.
Fasten the striog cutoff blade to the trimmer head
shield with two
M5
x 25 screws, lock washers and
hex nuts as shown.
Plate�
0
�
� LockWashe\.._
r
II
HexNut
®
"'-,,
__,,...�
--.... @
String Cutoff
MS x 12 Screw (4)
Blade
A
WARNING
POTENTIAL HAZARD
• Foreign objects can be thrown by
Trimmer.
WHAT CAN HAPPEN
• Contact with thrown objects can cause
personal injury.
HOW TO AVOID TIIE HAZARD
• Never operate the Trimmer without the
trlnnner head shield in place.
2.
Attach the trimmer head shield to the gearcase
with the four M5 x 12 screws aod plate as shown.
-10-
