[Models: BC2600H, BC3200H]
Installing Blade Shield
A
WARNING
PO'IENTIAL HAZARD
• Foreign objects can be thrown by
Brushcutter.
WHAT CAN HAPPEN
• Contact with thrown objects can cause
personal injury.
HOW TO AVOID TIIE HAZARD
• Never operate the Brushcutter without
the blade shield in place.
Gearcase
/Blade Shield
________,... I
MS x 12 Screw (4)
1.
Install the blade shield onto the gearcase.
2.
Install and tighten the four M5 x 12 screws.
[Models: BC2300, BC2600, BC3200]
Installing Trimmer Head
IMPORTANT: Make sure the trimmer head is
for LEFT-HAND ROTATION (counterclock
wise) as viewed from the operator's position,
and that the trimmer head adapter is a male,
M8 x 1.25 left-hand thread.
MPORTANT: The boss adapter must be,
installed on the splined shaft between the
gearcase and the trimmer head as shown.
3 mm Hex Wrench
◄
- Splined Shi?ft
�,--�-
BossAda
pter
Trimmer Head Adapter--.,_
1.
Install the boss adapter onto the splined shaft out
of the gearcase.
2.
Align the hole in the boss adapter with the hole in
the gearcase.
3.
Insert the 3 mm hex wrench into the holes
in
the
boss adapter and gearcase to lock the splined shaft.
4. · Thread the trimmer head adapter into the splined
shaft, then tighten the trimmer head finnly by
hand.
A
CAUTION
POTENTIAL HAZARD
•. If the trimmer head is not adequately
tightened, it can come loose from the
Trimmer during use.
WHAT CAN HAPPEN
• This may cause damage to property or
personal injury.
HOW TO AVOID TIIE HAZARD
• Make Sure the 1rimmer head is securely
fastened to the splined shaft in the
gearcase.
-11-
