MARUTI SUZUKI Omni, Руководство пользователя

Страница: 9 / 97

21
797-74E-I
BEFORE DRIVING
3-8
843E-01-003E
To Adjust the Belt
• 3-point non-retractor type
Adjust the shoulder portion of the belt so
that it is slightly slack. To shorten the
belt, pull the free end in the direction of
the arrow as illustrated. To lengthen the
belt, grab it at the shoulder anchor and
pull it in the direction of the arrow, at
right angles to the anchor. The shoulder
portion should have just enough slack so
that a clenched fist can be inserted
between the belt and your chest as
illustrated. Too much slack at the
shoulder portion makes the belt
ineffective in accidents. The shoulder
portion should be worn on the outside
shoulder only, and never under the arm.
After use, always rehang the belt on the
hook provided near the upper anchorage
point.
No modifications or additions of any
sort should be made to the seat belt
or its operating mechanism.
843E-01-004E
w w w w w
WARNING
843E-01-005
Be sure to inspect all seat belt
assemblies after any collision. Any
seat belt assembly which was in use
during a collision (other than a very
minor one) should be replaced, even
if damage to the assembly is not
obvious. Any seat belt assembly
which was not in use during a
collision should be replaced if it does
not function properly or is damaged
in any way.
w w
w w w
WARNING