MARUTI SUZUKI Omni Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 97

MARUTI SUZUKI Omni Скачать руководство пользователя страница 33

45

797-74E-I

6-6

OTHER CONTROLS AND EQUIPMENT

ASSIST GRIPS

Assist grips are provided for passenger
convenience.

Do not hang items on the assist grips.
They could obstruct the driver’s view,
resulting in an accident, or could be
thrown about in an accident or abrupt
manoeuvre, causing injury.

w

w

w

w

w

WARNING

70F-04-015

TYRE CHANGING TOOLS

Jack Handle is stowed near the front left
seat. Jack is stowed under the front left seat
and can be taken out after removing the
seat.

To remove the jack, turn its shaft counter-
clockwise and pull the jack out of the
storage bracket. To stow the jack, place it
in the storage bracket and turn the shaft
clockwise until the jack is securely held in
place.

The jack should be used only to
change wheels. It is important to read
the jacking instructions in the
EMERGENCY SERVICE section of this
manual before attempting to use the
jack.

After using the jack, jack handle, and
wheel wrench, be sure to stow them
securely or they can cause injury if an
accident occurs.

w

w

w

w

w

WARNING

w

w

w

w

w

WARNING

797-06-015

«
...
31
32
33
34
35
...
»

Содержание Omni


































































































Отзывы:

Нет отзывов