MARUTI SUZUKI Omni Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 97

MARUTI SUZUKI Omni Скачать руководство пользователя страница 38

50

797-74E-I

7-3

OPERATING YOUR VEHICLE

• Reduce your speed and change

down to a lower gear before going
down a long or steep hill. A lower
gear will allow the engine to provide
braking. Avoid riding the brakes or
they may overheat, resulting in
brake failure.

• When driving on slippery roads, be

sure to slow down before changing
down. Excessive and or sudden
changes in engine speed may cause
loss of traction, which could cause
you to lose control.

• Make sure that the vehicle is

completely stationary before you
change into reverse.

w

w

w

w

w

WARNING

USING THE TRANSMISSION

Starting off
To start off, depress and maintain pressure
upon the clutch pedal and change into 1st
gear. After releasing the parking brake,
gradually release the clutch. When you hear
a change in the engine’s sound (speed),
gently apply pressure to the accelerator to
keep the engine sound (speed) constant
whilst continuing to gradually release the
clutch.

797-06-004

Min speed

Max. speed

First

–

30 km/h

Second

10 km/h

50 km/h

Third

20 km/h

90 km/h

Fourth

30 km/h

Top Speed

Gear changing
All forward gears are synchronized, which
provides for quiet, easy changing. Always
depress the clutch pedal fully before
changing gears. To help gearshift, the
following chart shows the recommended
speed range in each gear.

«
...
36
37
38
39
40
...
»

Содержание Omni


































































































Отзывы:

Нет отзывов