MARUTI SUZUKI Ciaz Скачать руководство пользователя страница 186

Страница: 186 / 249

5-73

OTHER CONTROLS AND EQUIPMENT

79MH0-74E

Notes on iPod

Supported iPod

• iPod

touch (5th generation)

• iPod

touch (4th generation)

• iPod

touch (3rd generation)

• iPod

touch (2nd generation)

• iPod

touch (1st generation)

• iPod

classic

• iPod

nano (7th generation)

• iPod

nano (6th generation)

• iPod

nano (5th generation)

• iPod

nano (4th generation)

• iPod

nano (3rd generation)

• iPod

nano (2nd generation)

• iPod

nano (1st generation)

• iPod

(5th generation)

• iPhone

3GS

• iPhone

* Some functions may not be available

depending on the model of iPod

* iPod

is a trademark of Apple Inc., regis-

tered in the U.S. and other countries.

* iPhone

is a trademark of Apple Inc.,

registered in the U.S. and other coun-
tries.

* Apple is not responsible for the opera-

tion of this device or its compliance with
safety and regulatory standards.

iPod

connection

• Make sure to detach the iPod

after

pressing the engine switch to change the
ignition mode to LOCK. The iPod

may

not be shut down when it is being con-
nected and may result in battery deple-
tion.

• Please do not connect iPod

accesso-

ries such as an iPod

remote control or

headphones while connecting the iPod

with the unit. The unit may not operate
correctly.

AUX Function

(1) AUX/USB socket
(2) MEDIA button

AUX connection

To listen to auxiliary audio sources (sold
separately) through the unit, follow the
instruction below.
1) Connect the auxiliary audio source to

the AUX/USB socket (1) with an AUX
cable.

2) Press the MEDIA button (2).

Each time the button is pressed, the
mode will change as follows:

(2)

(1)

CAUTION

• Before connection, mute the unit,

and also keep the volume of the
auxiliary audio source within a
range that will not cause distortion.

• When the audio source is turned

off, noise may be emitted. Be sure
to turn off the unit or switch to
another mode before turning off the
audio source.

DISK (if inserted CD)

USB (iPod

) (if connected)

AUX (if connected)

Содержание Ciaz


























































































































































































































































Результаты поиска

Содержание Ciaz

Отзывы:

Похожие инструкции для Ciaz

Бренды по названию

Популярные бренды

MARUTI SUZUKI Ciaz, Руководство пользователя

Результаты поиска

Содержание Ciaz

Отзывы:

Похожие инструкции для Ciaz

Бренды по названию

Популярные бренды