MARUTI SUZUKI Ciaz Скачать руководство пользователя страница 183

Страница: 183 / 249

5-70

OTHER CONTROLS AND EQUIPMENT

79MH0-74E

• FOLDER RANDOM

The random indicator “F.RDM” will light.
The tracks in the currently selected
folder will be played in random order.

• ALL RANDOM

The random indicator “RDM” will light.
The tracks in the connected USB device
will be played in random order.

Repeat playback

Press the RPT button (6).
Each time the button is pressed, the mode
will change as follows:

• FILE REPEAT

The repeat indicator “RPT” will light.
The track currently being played will be
played repeatedly.

• FOLDER REPEAT

The repeat indicator “F.RPT” will light.
All the tracks in the folder currently
selected will be played repeatedly.

Display change

Press the DISP button (8).
Each time the button is pressed, display
will change as follows:

NOTE:
• “NO TITLE” will be displayed when there

is no text information in the disc currently
being played.

• If text data contains more than 12 char-

acters “>” mark will appear at the right
end. Holding down the DISP button (8)
for 1 second or longer can display the
next page.

Notes on USB device

Compatible USB devices

• USB Mass Storage Class

For details as to whether your USB mem-
ory/USB Audio is compatible with USB
Mass Storage Class, please contact the
USB memory/USB Audio manufacturer.

• USB Standard Compatibility 1.1/2.0 Full

Speed

• File System FAT12/16/32, VFAT
• Maximum current less than 1.0 A

USB device connection

• When connecting a USB device, make

sure that the connector is pushed all the
way into the port.

• Do not leave the USB device for long

periods of time in places inside the vehi-
cle where the temperature can rise too
high.

• Back up any important data beforehand.

We cannot accept responsibility for any
lost data.

• It is recommended not to connect a USB

device that contains data files other than
MP3/WMA/AAC format.

Recording MP3/WMA/AAC files on a
USB device

• Playback or display may not be possible

depending on the type of USB device in
use or the condition of the recording.

• Depending on the connected USB mem-

ory, the files may be played in different
order from the order that the files were
stored.

OFF FOLDER RANDOM ALL RANDOM

OFF FILE REPEAT

FOLDER REPEAT

Play time

Folder name

File name

Album name (MP3, AAC only)

Track title

Artist name

Содержание Ciaz


























































































































































































































































Результаты поиска

Содержание Ciaz

Отзывы:

Похожие инструкции для Ciaz

Бренды по названию

Популярные бренды

MARUTI SUZUKI Ciaz, Руководство пользователя

Результаты поиска

Содержание Ciaz

Отзывы:

Похожие инструкции для Ciaz

Бренды по названию

Популярные бренды