MARUTI SUZUKI Ciaz, Руководство пользователя

Страница: 78 / 249

3-6
OPERATING YOUR VEHICLE
79MH0-74E
82K254
Every time you press the engine switch,
the ignition mode changes as follows.
57L31006
57L31033
NOTE:
Automatic transaxle – If the gearshift lever
is in any position other than “P”, or if the
knob button is pushed when the gearshift
lever is in “P” position the ignition mode
cannot be returned to “LOCK” (OFF).
If the “PUSH” indicator light blinks and
the ignition modes cannot be selected
Your keyless push start system remote con-
troller may not be sensed as being within the
“interior workable area” (refer to the related
explanation in this section). Try again after
making sure you have the remote controller
with you. If the ignition modes still cannot be
selected, the battery of the remote controller
may be discharged. To be able to select an
ignition mode, you must then use the follow-
ing method:
57L21131
1) Without depressing the brake pedal
and the clutch pedal, push the engine
switch (1).
2) Within about 10 seconds during which
the “PUSH” indicator light in the instru-
ment cluster is blinking, touch the
engine switch with the lock switch end
of the remote controller (2) for about 2
seconds.
(1)
Automatic transaxle
P
P
(OFF)
ON ACC LOCK
(Audio equipment)
Gearshift lever in a
position other than
Gearshift
lever in
(OFF)
ON ACC LOCK
(Audio equipment)
Manual transaxle
(1)
(2)
EXAMPLE