MARUTI SUZUKI Ciaz, Руководство пользователя

Страница: 98 / 249

3-26
OPERATING YOUR VEHICLE
79MH0-74E
How to Use the Parking Sensor
Parking sensor switch
79MH0309
(1) Parking sensor switch
(2) Indicator
• Turn the ignition switch to the “ON” posi-
tion or press the engine switch to change
the ignition mode to “ON” with the park-
ing sensor switch in the “ON” position.
• Push the switch again and it stays in; this
is the OFF position. The indicator in the
switch goes out and the parking sensor
is deactivated.
NOTE:
• If you push the parking sensor switch
from the “OFF” to “ON” position when
the ignition switch is turned to “ON” posi-
tion or the engine switch is pressed to
change the ignition mode to “ON”, the
inside buzzer sounds.
• When the gearshift lever is shifted to the
“R” (Reverse) position with the system
ON, a buzzer will sound once.
Obstacle Indication by Parking Sen-
sor
Upon detecting an obstacle, the parking
sensor causes an interior buzzer to sound.
• A buzzer located behind the rear seat
sounds when a sensor at the rear
detects an obstacle.
• Warnings when obstacles are detected
by corner sensors
• Warnings when obstacles are detected
by center sensors
Switch position State
EXAMPLE ON
• When the indica-
tor light is on and
all necessary con-
ditions are met,
system becomes
ready for opera-
tion.
(2)
(1)
EXAMPLE OFF
• The system does
not operate. Push
the switch to turn
off the indicator if
you do not wish to
use the parking
sensor.
Distance
(approx.)
Buzzer
45 – 60 cm
(18 – 24 in.)
Short beeps at short
intervals
35 – 45 cm
(14 – 18 in.)
Short beeps at very
short intervals
Less than 35 cm
(14 in.)
Continuous beep
Distance
(approx.)
Buzzer
60 – 150 cm
(24 – 59 in.)
Short beeps at long
intervals
45 – 60 cm
(18 – 24 in.)
Short beeps at short
intervals
35 – 45 cm
(14 – 18 in.)
Short beeps at very
short intervals
Less than 35 cm
(14 in.)
Continuous beep