MARUTI SUZUKI 800, Руководство пользователя

Страница: 90 / 120

90
MARUTI 800 DOMESTIC
844-74E
INSPECTION AND MAINTENANCE
9-23
Headlights
Open the bonnet. Remove the socket and
rubber cover. Then unhook the bulb holding
spring and replace the bulb.
NOTE:
Your vehicle is provided with two spare
headlight bulbs for replacement in
emergency.
Front Clearance/Turn Signal Light, Side
Turn Signal Light, rear Combination
Light, Registration Plate Light.
To remove a bulb holder from a light
housing, turn the holder counterclockwise
and pull it out. To install the holder, push
the holder in and turn it clockwise.
Two types (small oval and round) of bulb
are used for these lights. To remove and
install a small oval bulb, simply pull out or
push in the bulb.
To remove a round bulb from a bulb holder,
push in the bulb and turn it counter
clockwise. To install a new bulb, push it in
and turn it clockwise. You can access the
individual bulb holders as described below:
CAUTION
After bulb replacement, ensure rubber
cover fitment by aligning 'TOP'
marking with upperside of headlamp.
If not properly fitted may lead to water
entry in headlamp.
844-09-042 844-09-043 844-09-044