MARUTI SUZUKI 800, Руководство пользователя

Страница: 94 / 120

94
MARUTI 800 DOMESTIC
844-74E
EMERGENCY SERVICE
10-1
JACKING INSTRUCTIONS
Do not put the jack head on to the
lateral rod (if equipped), or the lateral
rod will be damaged.
6) Continue to raise the jack slowly and
smoothly until the tyre clears the ground.
Do not raise the vehicle more than
necessary.
• Use the jack only to change wheels.
• Never jack up the vehicle on an
inclined surface.
• Never raise the vehicle with the jack
in a location other than the place
specified in the illustration near the
wheel to be changed.
• Make sure that the jack is raised at
least 2 inches (51 mm) before it
contacts the vehicle. Use of the jack
when it is within 2 inches of being
fully collapsed may result in failure
of the jack.
1) Park the vehicle securely on hard level
ground.
2) Choke the front and rear wheel
diagonally opposite the wheel to be
changed.
3) Switch on the hazard warning flasher if
your vehicle is in or near traffic.
4) Slacken but do not remove wheel nuts
on the wheel to be changed.
5) Position the jack vertically and raise the
jack by turning the jack handle clockwise
until the jack head fits the front
suspension arm or the rear axle as
shown overleaf.
CAUTION
w w w w w
WARNING
V
844-10-001 844-10-002