MARUTI SUZUKI 800, Руководство пользователя

Страница: 75 / 120

75
MARUTI 800 DOMESTIC
844-74E
INSPECTION AND MAINTENANCE
9-8
New and used oil can be hazardous.
Children and pets may be harmed by
swallowing new or used oil. Keep new
and used oil and used oil filters away
from children and pets.
Continuous contact with used engine
oil has been found to cause (skin)
cancer in laboratory animals.
Brief contact with used oil may irritate
skin.
To minimize your exposure to used
oil, wear a long-sleeve shirt and
moistureproof gloves (such as
dishwashing gloves) when changing
oil. If oil contacts your skin, wash
thoroughly with soap and water.
Launder any clothing or rags if wet
with oil.
Recycle or properly dispose of used
oil and filters.
4) Reinstall the drain plug and gasket.
Tighten the plug to a torque of
5.0 kg-m (36.5 lb-ft).
Replace the oil filter
1) Using an oil filter wrench, turn the oil
filter counterclockwise and remove it.
2) Using a clean rag, wipe off the mounting
surface on the engine where the new
filter will be seated.
3) Smear a little engine oil around the
rubber gasket of the new oil filter.
4) Screw on the new filter by hand until the
filter gasket contacts the mounting
surface.
w w w w w
WARNING
Tightening torque: 1.4 kg-m (10.5 lb-ft)
To tighten the oil filter properly, it is
important to accurately identify the
position at which the filter gasket
first contacts the mounting surface.
5) Tighten the filter 3/4 turn from the point
of contact with the mounting surface. [or
to 1.4 kg-m (10.5 lb-ft)] using an oil filter
wrench.
To prevent oil leakage, make sure that
the oil filter is tight, but do not
overtighten it.
CAUTION
CAUTION
844-09-007 844-09-008