Maruson TAC-HV1K, Руководство пользователя

Страница: 16 / 22

-26-
Setp 3: The dot before “230Vac” would turn to flickerless
after pressing the “Enter” button.
Setp 4: The output voltage would be 230Vac after the UPS is
turned on.
-13-
UPS INPUT NFB
Model No.
VOLTAGE CURRENT
1K(L) 300Vac 10A
2K(L) 300Vac 20A
3K(L) 300Vac 32A
(2) UPS Output Connection
The o utput of the UPS is US-type sockets. Simply plug the load
power cord to the output sockets to complete connection. Use o ne
cord for every 10A load.
Model No. Output Socket (pcs)
1K(L) 3 IEC-type
2K(L) 6 IEC-type
3K(L) 4 IEC-type
The wiring configuration is shown as
the following procedure:
a) Remove the small cover of the
terminal block.
b) Use 2.5mm
2
wires for wiring
configuration.
c) Upon completion of the wiring
configuration, please check
whether the wires are securely
affixed.
d) Put the small cover back to the rear panel.
Caution!
Do not connect equipment which would overload the UPS
system (e.g. laser printers)
Connection diagram