MartinLogan SCRIPT i, Руководство пользователя

Страница: 5 / 28

You may have noticed a connection on the back of your
Script i’s labeled ‘Power Out’. The use of this connection will
allow you to daisy-chain up to seven 16-volt MartinLogan
products and eliminate the need for multiple low-voltage
power supplies.
A variety of low voltage interconnect cables may be pur-
chased at your local MartinLogan dealer. Please ask them
about options to fit your specific needs.
To use this connection option choose a primary speaker
(whichever speaker is most conveinent) and connect it as
instructed in the ‘Low-Voltage Power Connection’ section
on the previous page. To attach additional speakers, run a
low-voltage interconnect cable from the ‘Power Out’ to
the next speakers ‘Power In’ (see figure 2).
When you first begin to play your Script i speaker, it will
sound a bit bass shy. This is due to the high-quality, long-life
components used in our woofer. Our custom made, butyl
surround woofer requires at least 30 hours of break-in at
90 dB (moderate listening levels) before any critical listening.
The break-in requirements of the crossover components
(and, to a lesser degree, the electrostatic transducer) are equal.
Operation 5
Using Only One Power Supply Break-In
Figure 2.
Connecting power to multiple speakers using one power supply.