MartinLogan SCRIPT i, Руководство пользователя

Страница: 7 / 28

Mounting the Script i On A Wall 7
3 At the desired installation location, mark a point on your
wall 27.5 inches above the floor (see figure 4).
4 Using a level, square the wall bracket and hold it flush
against the wall with the wall bracket’s center hole over
the center point you just marked. The cylindrical hinges
on the wall bracket should point away from the wall
and the hinge pins should point upwards towards the
ceiling. Mark 4 points (2 each at the top and bottom of
the bracket) inside of the wall bracket’s arc shaped cut
outs (see figure 5).
Figure 4.
Step 3
Figure 5.
Step 4