background image

It had long been the practice of stereo buffs to connect their

television to the stereo system. The advantage was the use

of the larger speakers and more powerful amplifier of the

stereo system. Even though the sound was greatly improved, it

was still mono and limited by the broadcast signal.

In the late 1970’s and early ‘80’s two new home movie

formats became widely available to the public: VCR and

laser disc. 

By 1985, both formats had developed into very high quality

audio/video sources. In fact, the sonic performance of some

video formats exceeded audio-only formats. Now, with

theater quality sound available at home, the only element

missing was the "surround sound" presentation found in

movie houses.

Fortunately, "Dolby” and “DTS" encoded movies (which

include almost all movies) have the same surround sound

information encoded on home releases as the theater films.

All that is required to retrieve this information is a decoder

and additional speakers and amps to reproduce it.

Home theater is a complex purchase and we recommend

that you consult your local MartinLogan dealer as they are

well versed in this subject

Each piece of a surround system can be purchased

separately. Take your time and buy quality. No one has

ever complained that the movie was too real. The following

list and descript iions will only give you a brief outline of

the responsibilities and demands placed on each speaker. 

Front Left and Front Right

If these speakers will also be the same two used for your

stereo playback then they should be of very high quality

and able to play loud (over 102 dB) and reproduce bass

below 80 Hz. 

Center Channel.

This is the most important speaker in a video system, as

almost all of the dialogue and a large portion of the front

speaker information is reproduced by the center channel.

It is important that the center speaker be designed by

the same manufacturer as the front speakers, and that it is

recommended for use as a center speaker. This is not the

place to cut corners.

Surround Speakers.

We recommend that the surround speakers play down

to 80 Hz or below. The surround speakers contain the

information that makes it appear that planes are flying over

your head. Some may suggest that this is the place to save

money and purchase a small inexpensive speaker. If you

choose to do so, be prepared to upgrade in the future as

discrete six channel digital encoding becomes available

and the demands on the surround speakers increase.

Subwoofer.

With any good surround system you will need a high-quality

subwoofer (the .1, in a 5.1 channel surround system). Most

movie soundtracks contain large amounts of bass informa-

tion as part of the special effects. Good subwoofers will

provide a foundation for the rest of the system.

14 Home Theater

Figure 21.

Ascent i speakers as front channels, Theater i as the center channel,

Script i speakers as side surround (effects) channels, and Depth subwoofers
as 0.1 (effects) channel.

H

OME

T

HEATER

Содержание SCRIPT i





























Отзывы: