MartinLogan SCRIPT i, Руководство пользователя

Страница: 9 / 28

Mounting the Script i On A Wall 9
9 Place the Script i onto the wall bracket aligning the
cylindrical parts of the cabinet bracket hinges with the
upward pointing pins on the wall bracket. Carefully
lower the Script i into place (see figure 8).
10 Using a 6mm Allen tool, attach a cap nut and washer on
top of each pin, but do not fully tighten the cap nuts
(see figure 8).
11 Make signal connections from the amplifier and the AC
power connection (see Operations section, pages 4-5).
12 Rotate the Script i to point at the listening position and
tighten the cap nuts.
13 To install the other Script i, repeat steps 2-12.
Figure 8.
Steps 9–10
Figure 9.
Step 12