2
SAFETY INFORMATION: Always read before proceeding.
WARNING
These instructions contain information and warnings that are necessary for
safe operation and maintenance of the Veritest. It is recommended that you
read the instructions carefully and ensure the contents are understood.
Failure to understand the instructions and comply with warnings and
instructions herein can result in serious injury, damage or even death.
In order to avoid the danger of electrical shock, it is important that proper
safety measures are taken when working with voltages exceeding 30V AC
rms, 42V AC peak or 60V DC. Never exceed the maximum allowable input
level for each function and range. Refer to the specifications for maximum
inputs. Never touch exposed wiring, connections or live circuits.
The Veritest must only be used in conditions and for the purpose which it
has been constructed. Attention should be paid to safety instructions,
technical specifications and use of the Veritest in dry surroundings.
Always inspect your meter, test leads and accessories for any sign of
damage before use. If any abnormal conditions exist (e.g: broken test leads,
cracked case, display not reading, etc.), do not attempt to use it. Do not
expose it to direct sunlight, excessive temperature or moisture.
Keep these instructions for future reference. Updated instructions and
product information are available at: www.martindale-electric.co.uk
SYMBOLS:
Equipment complies with relevant EU Directives
AC (Alternating Current)
Ground
Direct Current
Equipment protected by Double Insulation (Class II)
Caution - refer to accompanying documents
Caution - risk of electric shock
10. OPTIONAL ACCESSORIES
Infra red data lead
VRTL1
Download software
VRSOFT1
Mini printer
VRPRINT1
Data Lead VRPRINT1 to VR2240
TL130
Test lead (GB 13A plug)
TL206
Fused test lead set
TL54
11. MAINTENANCE
Cleaning
Maintenance consists of periodic cleaning.
The exterior of the instrument can be cleaned with a dry clean cloth to
remove any oil, grease or grime. Never use liquid solvents or detergents.
Repairs or servicing not covered in this manual should only be performed by
qualified personnel.
Calibration
The recommended calibration interval is 12 months.
Martindale Electric will carry out routine calibration (on a chargeable basis) if
the instrument is returned, carriage paid, to the address on the final page of
this document. Alternatively, a chargeable collection and return service is
available.
Repair & Service
There are no user serviceable parts in this unit. Return to Martindale Electric
if faulty. Our service department will promptly quote to repair any faults that
occur outside the warranty period.
Storage Conditions
The Veritest should be kept in warm, dry conditions away from direct sources
of heat or sunlight and in such a manner as to preserve the working life of the
instrument.
Warranty
Faults in manufacture and materials are fully guaranteed for 24 months from
date of invoice and will be rectified by us free of charge, provided the unit has
not been tampered with and is returned to us with its housing unopened.
Damage due to dropping, abuse or misuse is not covered by the guarantee.
Nothing in these instructions reduces your statutory rights.
19
Содержание VERITEST 2240
Страница 2: ......
