4
S y n c h ro Z a p QX 2 5 0
To p r o t e c t y o u r s e l f a n d o t h e r s f r o m b u r n s a n d f i r e
•
Never attempt to bypass the thermostatic switch or fuses. Always replace defective fuses
with ones of the specified type and rating.
•
Keep all combustible materials (for example fabric, wood, paper) at least 0.1 meters (4
inches) away from the fixture. Keep flammable materials well away from the fixture.
•
Do not illuminate surfaces within 0.3 meters (12 inches) of the fixture.
•
Provide a minimum clearance of 0.1 meters (4 inches) around fans and air vents.
•
Never place filters or other materials over the lens.
•
The exterior of the fixture can reach temperatures up to 65° C (150° F). Allow the fixture
to cool for at least 5 minutes before handling.
•
Do not modify the fixture or install other than genuine Martin parts.
•
Do not operate the fixture if the ambient temperature (Ta) exceeds 40° C (104° F).
To p r o t e c t y o u r s e l f a n d o t h e r s f r o m i n j u r y d u e t o
f a l l s
•
When suspending the fixture above ground level, verify that the structure can hold at
least 10 times the weight of all installed devices.
•
Verify that all external covers and rigging hardware are securely fastened and use an
approved means of secondary attachment such as a safety cable.
•
Block access below the work area whenever installing or removing the fixture.
Содержание SynchroZap QX250
Страница 1: ...SynchroZap QX250 User Manual P N 35000025 ...
