Martin Exterior 200, Руководство пользователя

Страница: 41 / 76

Programming using an MP-2 Uploader 41
To avoid false triggering by sudden light changes, for example from
automobile headlights, the light level must remain above or below the trigger
threshold for 5 minutes.
To set the light trigger:
1 From the Stand alone menu, select
L i g h t l e v e l
, then
E n a b l e
,
and then
O n
.
2 Select L e v e l and use the arrow keys to select a trigger level from 0
(darkest) to 2 5 5 (brightest). The light toggles on and off as you scroll past
the current light level.
3 Select O K .
Alternatively, you could capture the current light level using the sensor in the
fixture, and use this as the trigger level:
1 From the Stand alone menu, select L i g h t l e v e l , then E n a b l e ,
and then O n .
2 Select
C a p t u r e
and then select
G o
.
Setting a timer trigger
Stand-alone operation can be set for one, or two, periods, during a 24 hour
period, using the built-in clock.
If both the clock and the light sensor are used, operation starts, within the
times set, and whenever it is darker than the light-level setting. Operation
stops at the stop time provided that the ambient light is brighter than the
light-trigger setting.
The first thing to do is to set the correct time. See “Clock” on page 23.
You can set timer operation for a single period, or for two periods, for
example, one period in the morning, and one period in the evening. To set
the timer for a single period:
1 Select
S t a n d a l o n e
from the Fixture menu.
2 Select
T i m e r
, then
T i m e r
1
3 Select
S t a r t
, then
H o u r
. Use the arrow keys to specify the start hour.
Select
O K
.
4 Select
M i n u t e
. Use the arrow keys to specify the start minute. Select
O K .
5 Select B a c k .
6 Select S t o p , then H o u r . Use the arrow keys to specify the stop hour.
Select O K .