Programming from a PC using MUM
31
Programming from a
PC using MUM
The programming of scenes, and setting up of master/slave relationships,
can be performed from a personal computer using the MUM application.
The computer is connected to a fixture via a DABS1 USB-to-XLR adaptor,
used to program the stand-alone settings for that fixture, and then removed.
Once a fixture is subsequently switched on it can automatically run the
scenes in its program in a loop, according to the triggering criteria you have
specified (time of day, and/or light level).
If you are not familiar with the use of MUM, then it is recommend that you
familiarize yourself with it by reading the
MUM user manual
.
Getting started
To get started:
1 Connect a DABS1 adaptor to your PC.
2 Connect the DABS1 adaptor to your Exterior 200.
3 Power on the Exterior 200 and start the MUM application. The application
will automatically detect an Exterior 200 if it is powered-on and connected to
your computer via a DABS1 adaptor. It will also retrieve the current settings
on the fixture and display them.
PC
DABS1
Exterior 200
Содержание Exterior 200
