Programming using an MP-2 Uploader
37
Programming using
an MP-2 Uploader
The programming of scenes, and setting up of master/slave relationships,
can be performed using an MP-2 Uploader. The uploader is connected to
the fixture, used to program the stand-alone settings for that fixture (or all
the fixtures connected to that fixture by data link), and then removed. Once
a fixture is subsequently switched on it can automatically run the scenes in
its program in a loop, according to the triggering criteria you have specified
(time of day, or light level).
To summarize, you can use the MP-2 Uploader to program:
• Individual fixtures, one at a time.
• The same program in multiple fixtures that are linked with data cables.
• Individual programs in multiple fixtures that are linked with data cables.
If you are not familiar with the use of the MP-2, then it is recommend that
you familiarize yourself with it using the MP-2 Uploader manual.
Getting started
1 Plug the fixture’s, or data link’s, data-input cable (male) into the 3-pin
“DMX/RS-485 OUT” socket on the MP-2.
2 Apply power to the fixture and the MP-2.
3 Select
R e a d M e m o r y C a r d
from the MP-2 menu.
MP-2
Exterior 200s
Содержание Exterior 200
