58
Martin Professional™ Exterior 50 & 100™ system user manual
To apply sealant to a Splitter:
1. Check that all cables have
been connected and
connections tested.
2. See Figure 31. Place the
Splitter either horizontal
(with its cover
C
facing
upwards) or vertical (with
membrane
B
facing
upwards).
3. Either remove the two
screws
A
and lift the Splitter
cover off or use membrane
B
for access, whichever will
let you inject the sealant
vertically downwards into the
Splitter.
4. Install the supplied mixer
nozzle on the sealant
cartridge and place the cartridge in a standard caulking gun.
5. The sealant in the cartridge is a thick liquid. Fill the Splitter completely
with sealant, allowing air to escape.
6. If you removed the Splitter cover, reinstall it, fastening both screws
A
.
7. Allow the sealant to cure for 24 hours before exposing the Splitter to
heavy splashing with water or immersion.
A
B
Figure 31: Access for sealant
injection
C
A
Содержание Exterior 100
Страница 1: ...Martin Exterior 50 IP68 Martin Exterior 100 IP68 System User Manual TM TM...
Страница 82: ......
Страница 83: ......
Страница 84: ...www martin com Olof Palmes All 18 8200 Aarhus N Denmark Tel 45 8740 0000 Fax 45 8740 0010...